LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> ES 350 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Hybrid Battery Control System - Service Information (1 Of 3)) >> Hybrid Vehicle Control Ecu >> Installation [06/2018 - ] >> Procedure

Installation [06/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL HYBRID VEHICLE CONTROL ECU 
    1. Install the hybrid vehicle control ECU with the bolt and nut.

      Bolt 

      Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf) 

      Nut 

      Torque: 5.5 N.m (56 kgf/cm, 49 in.lbf) 

    2. Connect the 4 hybrid vehicle control ECU connectors.
  2. INSTALL NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 10 [06/2018 - 08/2021] , or refer to PROCEDURE - Step 10 [08/2021 - ]

  3. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY 

    Refer to INSTALLATION [06/2018 - 08/2020] , or refer to INSTALLATION [08/2020 - ]

  4. PERFORM INITIALIZATION 

    Refer to PRECAUTION [06/2018 - 08/2020] , or refer to PRECAUTION [08/2020 - 08/2021] , or refer to PRECAUTION [08/2021 - 09/2022] , or refer to PRECAUTION [09/2022 - ]

scientia non olet · About LEMON Manuals