LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> RX 450h Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Entertainment Systems >> Audio / Video System (Service Information) >> Quarter Trim Speaker (W/O Rear No. 2 Seat) >> Installation [10/2015 - ] >> Procedure

Installation [10/2015 - ]: Procedure

  1. INSTALL QUARTER SIDE SPEAKER ASSEMBLY 
    NOTE:

    Do not touch the speaker cone.

    1. Connect the connector.
    2. Engage the clip to temporarily install the quarter side speaker assembly.
    3. Install the quarter side speaker assembly with the bolt.

      Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

  2. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH 

    Refer to PROCEDURE - Step 18 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 17 [12/2017 - ]

  3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side) 

    Refer to PROCEDURE - Step 19 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 18 [12/2017 - ]

  4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side) 

    Refer to PROCEDURE - Step 27 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 26 [12/2017 - ]

  5. INSTALL RECLINING REMOTE CONTROL BEZEL RH (for RH Side) 

    w/o Rear Power Seat System:

    Refer to PROCEDURE - Step 28 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 27 [12/2017 - ]

  6. INSTALL FOLD SEAT SWITCH ASSEMBLY (for RH Side) 

    w/ Rear Power Seat System:

    Refer to PROCEDURE - Step 1

  7. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY (for LH Side) 

    Refer to PROCEDURE - Step 2 [10/2015 - 03/2018] , or refer to PROCEDURE - Step 2 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 1 [08/2019 - ]

  8. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY (for RH Side) 

    Refer to PROCEDURE - Step 3 [10/2015 - 03/2018] , or refer to PROCEDURE - Step 3 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 2 [08/2019 - ]

  9. INSTALL ROPE HOOK ASSEMBLY 

    Refer to PROCEDURE - Step 21 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 20 [12/2017 - ]

  10. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for LH Side) 

    Refer to PROCEDURE - Step 22 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 21 [12/2017 - ]

  11. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for RH Side) 

    Refer to PROCEDURE - Step 32 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 31 [12/2017 - ]

  12. INSTALL REAR FLOOR FINISH SIDE PLATE LH 

    Refer to PROCEDURE - Step 23 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 22 [12/2017 - ]

  13. INSTALL REAR SEAT SIDE GARNISH LH 

    Refer to PROCEDURE - Step 24 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 23 [12/2017 - ]

  14. INSTALL UPPER QUARTER TRIM PAD LH 

    Refer to PROCEDURE - Step 25 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 24 [12/2017 - ]

  15. INSTALL REAR SEAT ASSEMBLY LH (for LH Side) 

    Refer to INSTALLATION [10/2015 - ]

  16. INSTALL REAR SEAT ASSEMBLY RH (for RH Side) 

    Refer to INSTALLATION [10/2015 - ]

  17. INSTALL REAR DOOR SCUFF PLATE LH 

    Refer to PROCEDURE - Step 41 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 40 [12/2017 - ]

  18. INSTALL REAR FLOOR FINISH PLATE 

    Refer to PROCEDURE - Step 50 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 49 [12/2017 - ]

  19. INSTALL DECK SIDE TRIM BOX RH 

    Refer to PROCEDURE - Step 51 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 50 [12/2017 - ]

  20. INSTALL FRONT DECK FLOOR BOX (for LH Side) 

    Refer to PROCEDURE - Step 52 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 51 [12/2017 - ]

  21. INSTALL REAR NO. 4 FLOOR BOARD 

    Refer to PROCEDURE - Step 53 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 52 [12/2017 - ]

  22. INSTALL REAR DECK FLOOR BOX 

    Refer to PROCEDURE - Step 54 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 53 [12/2017 - ]

  23. INSTALL REAR NO. 3 FLOOR BOARD 

    Refer to PROCEDURE - Step 55 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 54 [12/2017 - ]

  24. INSTALL DECK BOARD ASSEMBLY 

    Refer to PROCEDURE - Step 56 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 55 [12/2017 - ]

  25. INSTALL TONNEAU COVER ASSEMBLY 

    Refer to PROCEDURE - Step 57 [10/2015 - 12/2017] , or refer to PROCEDURE - Step 56 [12/2017 - ]

scientia non olet · About LEMON Manuals