Installation [07/2015 - ]: Procedure
- INSTALL COMBINATION METER ASSEMBLY
- Connect the 2 connectors.
- Engage the 2 clips.
- Install the combination meter assembly with the 2 screws.
- INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
- CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (for Manual Tilt and Manual Telescopic Steering Column) NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION [07/2015 - ]
- CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (for Power Tilt and Power Telescopic Steering Column) NOTE:
- Reset the auto away/return function setting to the previous condition by changing the customize parameter. Refer to CUSTOMIZE PARAMETERS [07/2015 - ]
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION [07/2015 - ]
- INSTALL LUGGAGE TRIM SERVICE HOLE COVER
Refer to PROCEDURE - Step 3