Installation [07/2015 - ]: Procedure

INSTALL AUXILIARY BATTERY
1. Install the auxiliary battery.
2. Install the auxiliary battery clamp with the bolt and nut.
  Nut
  
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
  
  Bolt
  
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
3. Connect the auxiliary battery hose.
  HINT:
  
  Push in the auxiliary battery hose to the auxiliary battery until a click sound is heard.
4. Connect the positive (+) auxiliary battery cable with the nut.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
5. Install the auxiliary battery terminal cap.
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION [07/2015 - ] .

Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
INSTALL LUGGAGE TRIM SERVICE HOLE COVER
1. Engage the 2 claws to connect the luggage trim service hole cover.