Removal [09/2015 - 08/2017]: Procedure

PRECAUTION
NOTE:
After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Refer to PRECAUTION [09/2015 - ] ).
REMOVE UPPER RADIATOR SUPPORT SEAL
Refer to PROCEDURE - Step 3
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [09/2015 - 08/2019] ).
REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY
Refer to PROCEDURE - Step 9

REMOVE DCM (TELEMATICS TRANSCEIVER)

Disconnect the connectors.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE NO. 2 TELEPHONE BRACKET

Remove the 2 screws and telephone bracket LH.

Remove the 2 screws and telephone bracket RH.

REMOVE NO. 1 TELEPHONE BRACKET
Remove the No. 1 telephone bracket (See page See step 5).