DTC P107A-2A: Fuel Rail Pressure Sensor (Low) Signal Stuck in Range; DTC P107A-64: Fuel Rail Pressure Sensor (Low) Signal Plausibility Failure [09/2022 - ]: Description
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus IS 300, 2023 Lexus IS 300, 2022 Lexus IS 300, 2021 Lexus IS 300, and 2020 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
Refer to DTC P107A-11.
Refer to DESCRIPTION
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P107A-2A | Fuel Rail Pressure Sensor (Low) Signal Stuck in Range | When target low pressure side fuel pressure changes, the change in fuel pressure sensor value is abnormal (2 trip detection logic). |
|
Comes on | DTC stored |
|
| P107A-64 | Fuel Rail Pressure Sensor (Low) Signal Plausibility Failure | When the fuel pump on the low pressure side is operated at the maximum during a fuel cut, the low pressure side fuel pressure is higher or lower than threshold (2 trip detection logic). |
|
Comes on | DTC stored |
|