LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Engine Control System (4GR-FSE) - Diagnostic Codes (1 Of 5)) >> SFI System >> DTC P0088: Fuel Rail / System Pressure - Too High [04/2013 - 08/2015] >> Description

DTC P0088: Fuel Rail / System Pressure - Too High [04/2013 - 08/2015]: Description

WARNING: This page is about a different car, the 2015 Lexus IS 250 and 2014 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0087.

Refer to DESCRIPTION 

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory
P0088 Fuel Rail / System Pressure - Too High ECM did not command fuel pump for high pressure to open spill control valve, but fuel pressure increases 3 MPa (30.6 kgf/cm2 , 435 psi) from target pressure for about 10 seconds (1 trip detection logic).
  • Fuel pump for high pressure
  • Fuel relief valve
  • Fuel delivery pipe sub-assembly (fuel pressure sensor)
  • ECM
Comes on DTC stored