LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2016 >> GX 460 Base >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio / Video System (Service Information) >> Pillar Speaker >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

  1. REMOVE PRECAUTION 
    NOTE:

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Refer to PRECAUTION [08/2015 - ] ).

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    WARNING:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [08/2015 - 08/2019] , or refer to INITIALIZATION [08/2019 - 08/2021] , or refer to INITIALIZATION [08/2021 - 08/2022] , or refer to INITIALIZATION [08/2022 - ] ).

  3. REMOVE FRONT NO. 1 ASSIST GRIP PLUG LH 

    Refer to PROCEDURE - Step 11 [08/2015 - 08/2016] , or refer to PROCEDURE - Step 11 [08/2016 - 08/2019] , or refer to PROCEDURE - Step 11 [08/2019 - ]

  4. REMOVE NO. 1 ASSIST GRIP 

    Refer to PROCEDURE - Step 13 [08/2015 - 08/2016] , or refer to PROCEDURE - Step 13 [08/2016 - 08/2019] , or refer to PROCEDURE - Step 13 [08/2019 - ]

  5. REMOVE FRONT PILLAR GARNISH LH 

    Refer to PROCEDURE - Step 14 [08/2015 - 08/2016] , or refer to PROCEDURE - Step 14 [08/2016 - 08/2019] , or refer to PROCEDURE - Step 14 [08/2019 - ]

  6. REMOVE FRONT NO. 3 SPEAKER ASSEMBLY 
    1. Disconnect the connector.
      GTY279463Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Detach the clip and claw and remove the front No. 3 speaker.