LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2015 >> CT 200h Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Service Information) >> Fuel Lid Opener Switch >> Removal [08/2014 - ] >> Procedure

Removal [08/2014 - ]: Procedure

  1. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH 
    1. Disconnect the front door opening trim weatherstrip LH.
      GTY348599Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the residual weatherstrip sealant from the body of the vehicle using cleaner.
      NOTE:

      Remove the sealant completely. Any residual sealant may transfer to other areas of the vehicle when removing/installing the interior parts.

  2. REMOVE INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 11

  3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 12

  4. REMOVE FUEL LID OPENER SWITCH 
    1. Disengage the 2 claws and remove the fuel lid opener switch.
      GTY352816Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals