Installation [10/2017 - 11/2021]: Procedure

1. Install the suspension tower damper to the front upper No. 2 suspension member with the 4 bolts.

   Torque: 20 N.m (204 kgf/cm, 15 ft.lbf) 

   NOTE:

   Do not extend or compress the damper.

for 2GR-FKS: Refer to PROCEDURE - Step 103 [10/2017 - 09/2020] , or refer to PROCEDURE - Step 103 [09/2020 - ]

for 8AR-FTS: Refer to PROCEDURE - Step 78 [10/2016 - 09/2020] , or refer to PROCEDURE - Step 78 [09/2020 - ]