LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2014 >> IS 350 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Engine Lubrication System (8AR-FTS) - Service Information) >> Oil Level Sensor >> Removal [08/2015 - 10/2016] >> Procedure

Removal [08/2015 - 10/2016]: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus IS 300, 2023 Lexus IS 300, 2022 Lexus IS 300, 2021 Lexus IS 300, and 2020 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. DRAIN ENGINE OIL 

    See step  1

  2. REMOVE FRONT SUSPENSION MEMBER BRACE 

    Refer to PROCEDURE - Step 12

  3. REMOVE NO. 2 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 13

  4. REMOVE ENGINE OIL LEVEL SENSOR 
    1. Disconnect the engine oil level sensor connector.
      GTY641320Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 4 bolts and engine oil level sensor from the oil pan sub-assembly.
    3. Cut away part of the gasket and remove the gasket from the engine oil level sensor.

      HINT: 

      Remove only the outer part of the gasket.

      GTY633642Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Cutting position
      *b Supply Part
scientia non olet · About LEMON Manuals