Removal [08/2015 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus IS 300, 2023 Lexus IS 300, 2022 Lexus IS 300, 2021 Lexus IS 300, and 2020 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 3 [08/2015 - 10/2016] , or refer to PROCEDURE - Step 3 [10/2016 - 09/2020] , or refer to PROCEDURE - Step 3 [09/2020 - ]

REMOVE PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)

Slide the clip and disconnect the No. 2 ventilation hose from the PCV valve (ventilation valve sub-assembly).

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Using a 22 mm ball joint lock nut wrench, remove the PCV valve (ventilation valve sub-assembly) from the cylinder head cover sub-assembly.

*a	22 mm Ball Joint Lock Nut Wrench