Removal [08/2015 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus IS 300, 2023 Lexus IS 300, 2022 Lexus IS 300, 2021 Lexus IS 300, and 2020 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 3 [08/2015 - 10/2016]
, or refer to PROCEDURE - Step 3 [10/2016 - 09/2020]
, or refer to PROCEDURE - Step 3 [09/2020 - ]
- REMOVE IGNITION COIL ASSEMBLY
- Disconnect the 4 ignition coil assembly connectors.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the 4 bolts and 4 ignition coil assemblies from the cylinder head cover sub-assembly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
NOTE:
If an ignition coil assembly has been struck or dropped, replace it.
HINT:
Arrange the removed parts in the correct order.
- REMOVE SPARK PLUG
- Using a 16 mm spark plug wrench, remove the 4 spark plugs from the cylinder head sub-assembly.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
NOTE:
If a spark plug has been struck or dropped, replace it.
HINT:
Arrange the removed parts in the correct order.