LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2012 >> LS 460 AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seats (Service Information) >> Front Seat Cushion Heater >> Removal >> Removal

Front Seat Cushion Heater: Removal: Removal

NOTE:
  • As the front passenger side seat has an occupant classification system, its front seat cushion assembly cannot be disassembled.
  • If replacing the front passenger side seat, replace the front seat set (cushion assembly, occupant classification ECU and 2 nuts).
  1. REMOVE FRONT SEAT ASSEMBLY LH 
    1. Remove the front seat assembly. Refer to REMOVAL .
  2. REMOVE FRONT SEAT CUSHION SHIELD LH  See step  1
  3. REMOVE FRONT NO. 1 SEAT CUSHION SHIELD LH  See step  5
  4. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH  . Refer to REMOVAL - Step 5
  5. REMOVE FRONT SEAT CUSHION SHIELD INNER LH  See step  7
  6. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH  See step  8
  7. REMOVE FRONT SEAT CUSHION ASSEMBLY LH  See step  10
  8. REMOVE FRONT SEAT CUSHION FRAME SUB-ASSEMBLY LH  See step  12
  9. REMOVE FRONT SEAT CUSHION COVER SUB-ASSEMBLY LH 
    1. Remove the hog rings and seat cushion cover from the seat cushion pad.
      Fig 1: Identifying Hog Rings, Seat Cushion Cover & Seat Cushion Pad
      GTY266145Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals