Removal

REAR SUSPENSION: REAR STABILIZER BAR: REMOVAL

1. REMOVE SIDE STEP ASSEMBLY LH Removal

2. REMOVE STABILIZER CONTROL VALVE PROTECTOR Removal

3. DRAIN SUSPENSION FLUID Removal

4. REMOVE REAR STABILIZER LOWER BRACKET

(a) Remove the 4 bolts and 2 rear stabilizer lower brackets.





5. REMOVE REAR STABILIZER BAR SUB-ASSEMBLY

(a) Remove the 2 bolts, 2 nuts and rear stabilizer bar.





NOTICE:
Turn the bolts while holding the nuts.

(b) Remove the 2 stabilizer bushes from the rear stabilizer bar.

6. DISCONNECT REAR STABILIZER CONTROL TUBE ASSEMBLY

(a) Remove the 2 union bolts and 2 pressure port gaskets and disconnect the rear stabilizer control tube from the rear stabilizer control cylinder.





7. REMOVE REAR STABILIZER CONTROL CYLINDER

(a) Remove the bolt, nut and rear stabilizer control cylinder.





NOTICE:
Do not hold the rear stabilizer control cylinder by the cylinder boot.

HINT
Turn the nut while holding the bolt.

(b) Remove the 2 bleeder plug caps from the rear stabilizer control cylinder.

8. REMOVE REAR STABILIZER LINK ASSEMBLY

(a) Remove the bolt, nut and rear stabilizer link assembly.





HINT
Turn the nut while holding the bolt.