Removal

EXTERIOR PANELS / TRIM: SIDE STEP: REMOVAL

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. REMOVE SIDE STEP ASSEMBLY LH





Disconnect the connector and detach the clamp.

Text in Illustration





(a) Remove the 6 bolts.





Put protective tape around the side step.

Text in Illustration





(b) Using a T30 "TORX" socket wrench, remove the 2 screws.

(c) Remove the 3 screws.

(d) Detach the 6 clips and remove the side step.