LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2010 >> GS 350 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 158 (Engine Control (SFI) (2GR-FSE) System (DTCS P0010 - P0354)) >> SFI System >> DTC P0101: Mass Air Flow Circuit Range / Performance Problem >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2009 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
Monitor runs whenever following DTCs not present None
Throttle position (TP sensor voltage) 0.24 V or more
Engine Running
Battery voltage 10.5 V or more
Engine coolant temperature 70°C (158°F) or more
IAT sensor circuit (P0110, P0112, P0113) OK
ECT sensor circuit (P0115, P0117, P0118) OK
CKP sensor circuit (P0335) OK
TP sensor circuit (P0120, P0121, P0122, P0123, P0220, P0222, P0223, P2135) OK
EVAP system pressure sensor circuit (P0450, P0452, P0453) OK
EVAP leak detection pump (P2401, P2402) OK
EVAP vent valve (P2419, P2420) OK