LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2009 >> IS 250 RWD, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel (Service Information) >> Instrument Panel Safety Pad >> Reassembly >> Reassembly

Instrument Panel Safety Pad: Reassembly: Reassembly

  1. INSTALL NO. 2 METER HOOD RETAINER 
    1. Install the No. 2 meter hood retainer with the 2 screws <F>.
      Fig 1: Installing No. 2 Meter Hood Retainer
      GTY143138Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 1 METER HOOD RETAINER 
    1. Install the No. 1 meter hood retainer with the 2 screws <F>.
      Fig 2: Installing No. 1 Meter Hood Retainer
      GTY143156Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL NO. 1 INSTRUMENT PANEL PIN 
    1. Install the 4 No. 1 instrument panel pins with the 4 screws <F>.
      Fig 3: Installing No. 1 Instrument Panel Pin
      GTY128267Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL INSTRUMENT PANEL SPACER 
    1. Install the instrument panel spacer.
      Fig 4: Identifying Instrument Panel Spacer
      GTY128575Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL ENGINE SWITCH 
    1. Engage the 2 claws to install the engine switch.
      Fig 5: Identifying Engine Switch
      GTY127210Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSTALL AUTOMATIC LIGHT CONTROL SENSOR 
    1. Engage the 2 claws to install the automatic light control sensor.
      Fig 6: Installing Automatic Light Control Sensor
      GTY119029Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. INSTALL DEFROSTER NOZZLE GARNISH 
    1. Engage the 8 claws and 2 clips to install the defroster nozzle garnish.
      Fig 7: Identifying Defroster Nozzle Garnish
      GTY121586Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY  . Refer to INSTALLATION - Step 1
  9. INSTALL NO. 2 INSTRUMENT PANEL WIRE 
    1. Engage the 4 clamps.
      Fig 8: Installing No. 2 Instrument Panel Wire
      GTY140846Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector to install the No. 2 instrument panel wire.
  10. INSTALL NAVIGATION ANTENNA (w/ Navigation System)  . Refer to INSTALLATION - Step 1
  11. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY  . Refer to INSTALLATION - Step 20
  12. INSTALL SIDE DEFROSTER NOZZLE 
    1. Engage the 4 claws to install the side defroster nozzle.
      Fig 9: Identifying Side Defroster Nozzle
      GTY123105Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. INSTALL NO. 2 HEATER TO REGISTER DUCT 
    1. Install the No. 2 heater to register duct with the 4 screws <F>.
      Fig 10: Installing No. 2 Heater To Register Duct
      GTY119127Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  14. INSTALL DEFROSTER NOZZLE ASSEMBLY 
    1. Install the defroster nozzle assembly with the 3 screws <F>.
      Fig 11: Identifying Defroster Nozzle Assembly
      GTY119126Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  15. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT 
    1. Install the side No. 2 defroster nozzle duct with the screw <F>.
      Fig 12: Identifying Side No. 2 Defroster Nozzle Duct
      GTY125311Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  16. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT 
    1. Install the side No. 1 defroster nozzle duct with the screw <F>.
      Fig 13: Identifying Side No. 1 Defroster Nozzle Duct
      GTY119125Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  17. INSTALL NO. 3 HEATER TO REGISTER DUCT 
    1. Install the No. 3 heater to register duct with the 3 screws <F>.
      Fig 14: Identifying No. 3 Heater To Register Duct
      GTY119124Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  18. INSTALL NO. 1 HEATER TO REGISTER DUCT 
    1. Install the No. 1 heater to register duct with the 3 screws <F>.
      Fig 15: Identifying No. 1 Heater To Register Duct
      GTY119123Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002