LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> RX 400h AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel >> Instrument Panel Safety Pad >> Reassembly

Instrument Panel Safety Pad: Reassembly

  1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY 
  2. INSTALL AUTOMATIC LIGHT CONTROL SENSOR 
  3. INSTALL INSTRUMENT PANEL NO.2 WIRE 
    1. Engage the 18 clamps.
    2. Install the 2 screws and the instrument panel No.2 wire.
      Fig 1: Identifying Instrument Panel No.2 Wire Clamps
      G05274406Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL NO.2 RADIO ANTENNA CORD (w/ Navigation System)  (See INSTALLATION )
  5. INSTALL NO.2 RADIO ANTENNA CORD (w/o Navigation System)  (See INSTALLATION )
  6. INSTALL GLOVE BOX LIGHT ASSEMBLY 
    1. Engage the 2 claws and install the glove box light assembly.
    2. Connect the connector.
      Fig 2: Locating Glove Box Light Connector
      G05274405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. INSTALL INSTRUMENT PANEL BRACKET SUB-ASSEMBLY CENTER 
    1. Install the screw < C > and the instrument panel bracket sub-assembly center.
      Fig 3: Identifying Instrument Panel Bracket Screw
      G05274404Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. INSTALL DEFROSTER NOZZLE NO.1 GARNISH 
    1. Engage the 2 clips and 4 claws then install the defroster nozzle No.1 garnish.
      Fig 4: Identifying Defroster Nozzle No.1 Garnish Claws And Clips
      G05274403Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. INSTALL NETWORK GATEWAY ECU 
    1. Install the screw < C > and the network gateway ECU.
      Fig 5: Identifying Network Gateway ECU Screw
      G05281238Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY (w/ Rain Sensor) 
    1. Install the screw < C > and the windshield wiper relay assembly.
      Fig 6: Identifying Windshield Wiper Relay Screw
      G05281239Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. INSTALL SIDE DEFROSTER NO.1 NOZZLE 
    1. Engage the 2 claws and install the side defroster No.1 nozzle.
  12. INSTALL SIDE DEFROSTER NO.2 NOZZLE 

    HINT:

    Use the same procedures for the side defroster No.2 nozzle and the side defroster No.1 nozzle

    Fig 7: Identifying Side Defroster No. 1 Nozzle Claws
    G05274402Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. INSTALL SIDE DEFROSTER NO.1 NOZZLE DUCT 
    1. Install the screw < C > and the side defroster No.1 nozzle duct.
  14. INSTALL SIDE DEFROSTER NO.2 NOZZLE DUCT 

    HINT:

    Use the same procedures for the side defroster No.2 nozzle duct and the side defroster No.1 nozzle duct.

    Fig 8: Identifying Side Defroster No. 1 Nozzle Duct Screw
    G05274401Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  15. INSTALL HEATER TO REGISTER CENTER SUB DUCT 
    1. Install the 2 screws < C > and the heater to register center sub duct.
      Fig 9: Identifying Heater To Register Center Sub Duct Screws
      G05274400Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  16. INSTALL HEATER TO REGISTER NO.1 DUCT 
    1. Install the 4 screws < C > and the heater to register No.1 duct.
  17. INSTALL HEATER TO REGISTER NO.4 DUCT 

    HINT:

    Use the same procedures for the heater to register No.4 duct and the heater to register No.1 duct.

    Fig 10: Identifying Heater To Register No. 1 Duct Screws
    G05274399Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  18. INSTALL DEFROSTER NOZZLE ASSEMBLY 
    1. Install the 3 screws < C > and the defroster nozzle assembly.
      Fig 11: Identifying Defroster Nozzle Assembly Screws
      G05274398Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  19. INSTALL INSTRUMENT PANEL NO.1 PIN 
    1. Install the screw < C > and the instrument panel No.1 pin.
      Fig 12: Locating Instrument Panel No.1 Pin Screw
      G05274397Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  20. INSTALL SIDE DEFROSTER NO.3 NOZZLE DUCT 
    1. Install the screw < C > and the side defroster No.3 nozzle duct.
  21. INSTALL SIDE DEFROSTER NO.4 NOZZLE DUCT 

    HINT:

    Use the same procedures for the side defroster No.4 nozzle duct and the side defroster No.3 nozzle duct.

    Fig 13: Identifying Side Defroster No. 3 Nozzle Duct Screw
    G05274396Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  22. INSTALL LIGHT CONTROL RHEOSTAT 
    1. Engage the 2 claws and install the light control rheostat.
  23. INSTALL FRONT NO.2 SPEAKER  (See INSTALLATION )
  24. INSTALL FRONT NO.2 SPEAKER 

    HINT:

    Use the same procedures for the RH side and the LH side.

    Fig 14: Identifying Light Control Rheostat Claws
    G05281247Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  25. INSTALL FRONT NO.2 SPEAKER (w/ Front Center Speaker)  (See INSTALLATION )
  26. INSTALL INSTRUMENT PANEL NO.1 SPEAKER PANEL SUB-ASSEMBLY 
    1. Engage the 2 clips and install the instrument panel No.1 speaker panel sub-assembly.
  27. INSTALL INSTRUMENT PANEL NO.2 SPEAKER PANEL SUB-ASSEMBLY 

    HINT:

    Use the same procedures for the instrument panel No.2 speaker panel sub-assembly and the instrument panel No.1 speaker panel sub-assembly.

    Fig 15: Identifying Instrument Panel No.1 Speaker Panel Clips
    G05274419Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  28. INSTALL SPEAKER HOLE NO.1 COVER (w/ Mark Levinson Speaker System) 
    1. Engage the 4 clips and install the speaker hole No. 1 cover.
scientia non olet · About LEMON Manuals