LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> RX 400h AWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio/Visual >> Instrument Panel Speaker >> Installation

Instrument Panel Speaker: Installation

  1. INSTALL FRONT NO. 2 SPEAKER (for Driver Side) 
    1. Connect the connector.
      Fig 1: Locating Front No.2 Speaker Bolts
      G05270764Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the front No.2 speaker with the 2 bolts.
      Fig 2: Locating Front No.2 Speaker Bolts
      G05270764Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (for Driver Side) 
    1. Engage the 2 clips and the 2 claws and install the No.1 instrument panel speaker panel subassembly.
      2. Fig 3: Identifying No.1 Instrument Panel Speaker Panel Subassembly Clips And Claws
      G05270766Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL FRONT PILLAR GARNISH (for Driver Side)  (See INSTALLATION )
  4. INSTALL FRONT NO.2 SPEAKER 
    1. Connect the connector.
    2. Install the front No.2 speaker with the 2 bolts.
      Fig 4: Locating Front No.2 Speaker Bolts
      G05270759Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL NO.1 SPEAKER HOLE COVER 
    1. Engage the 4 clips and install the No.1 speaker hole cover.
      2. Fig 5: Locating No.1 Speaker Hole Cover Clips
      G05270761Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSTALL MULTI-DISPLAY  (See INSTALLATION  )
  7. INSTALL RADIO RECEIVER  (See INSTALLATION  )
  8. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER  (See INSTALLATION )
  9. INSTALL CONSOLE PANEL UPPER FRONT  (See INSTALLATION )
  10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 
  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  12. PERFORM INITIALIZATION 
    NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal. (See INITIALIZATION )
scientia non olet · About LEMON Manuals