Removal

AUDIO / VIDEO: LUGGAGE SPEAKER: REMOVAL

1. REMOVE ENGINE ROOM SIDE COVER LH Removal

2. REMOVE REAR SEAT CUSHION HINGE COVER RH Removal

3. REMOVE REAR NO. 2 SEAT HINGE COVER RH Removal

4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
- w/ Navigation System:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. REMOVE REAR NO. 2 SEAT ASSEMBLY
(a) w/ Automatic Folding-up Function:
Remove the rear No. 2 seat assembly Removal.
(b) w/ Manual Folding-up Function:
Remove the rear No. 2 seat assembly Removal.
6. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE Removal

7. REMOVE REAR STEP COVER Removal

8. REMOVE REAR DOOR SCUFF PLATE RH Removal

9. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK Removal

10. REMOVE REAR SEAT COVER CAP (for Rear No. 2 Seat with Manual Folding-up Function) Removal

11. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH Removal

12. REMOVE NO. 1 WOOFER BOX SPEAKER ASSEMBLY
(a) Disconnect the connector.






(b) Remove the 5 bolts and box speaker.