Removal

EXTERIOR PANELS / TRIM: RADIATOR GRILLE: REMOVAL





1. REMOVE ENGINE ROOM SIDE COVER LH
(a) Remove the 7 clips and engine room side cover.






2. REMOVE ENGINE ROOM SIDE COVER RH
(a) Remove the 7 clips and engine room side cover.






3. REMOVE UPPER RADIATOR SUPPORT SEAL
(a) Remove the 3 clips and upper radiator support seal.






4. REMOVE RADIATOR GRILLE ASSEMBLY
(a) Put protective tape around the radiator grille.
(b) Remove the screw and 2 clips.
(c) Detach the 5 clips and partially remove the upper radiator seal.
(d) w/o Wide View Front Monitor System:
Detach the 12 claws and remove the radiator grille.
(e) w/ Wide View Front Monitor System:
Detach the 12 claws, disconnect the connector and remove the radiator grille.