Removal

AUDIO / VIDEO: BACK DOOR SPEAKER: REMOVAL

HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.

1. REMOVE ENGINE ROOM SIDE COVER LH Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
- w/ Navigation System:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE CENTER BACK DOOR GARNISH Disassembly

4. REMOVE BACK DOOR SIDE GARNISH LH Disassembly

5. REMOVE BACK DOOR SIDE GARNISH RH Disassembly

6. REMOVE BACK DOOR GARNISH Disassembly

7. REMOVE REAR HEADER SPEAKER ASSEMBLY






(a) Remove the 3 screws.
(b) Disconnect the connector and remove the speaker.
NOTICE:
Do not touch the cone part of the speaker.