LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (M/T Clutch) >> Clutch Pedal Switch >> Installation

Clutch Pedal Switch: Installation

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL CLUTCH PEDAL SWITCH ASSEMBLY 
    1. Install the clutch pedal switch assembly with the nut.

      Torque: 16 N*m (160 kgf*cm, 12 ft.*lbf) 

    2. Connect the clutch pedal switch assembly connector.
  2. INSPECT CLUTCH PEDAL SWITCH ASSEMBLY 

    (See ON-VEHICLE INSPECTION  )

scientia non olet · About LEMON Manuals