LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (M/T Clutch) >> Clutch Pedal Switch >> On-Vehicle Inspection

On-Vehicle Inspection

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT CLUTCH PEDAL SWITCH ASSEMBLY 
    1. Check that the engine does not start when the clutch pedal is released.
    2. Check that the engine starts when the clutch pedal is fully depressed.

      If necessary, replace the clutch pedal switch assembly.

scientia non olet · About LEMON Manuals