Vanity Light: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE ROOF HEADLINING ASSEMBLY
(See REMOVAL )

HINT.

Refer to the " 1 Remove Roof Headlining Assembly" for a detailed procedure
REMOVE VANITY LIGHT ASSEMBLY
1. Tilt the tab to disengage the 2 claws < A > and separate the bulb holder from the vanity light, as shown in the illustration.
2. Disengage the claw < B > and remove the vanity light assembly.
  
  Fig 1: Identifying Claw And Vanity Light Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002