Outer Rear View Mirror: Installation
WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL OUTER REAR VIEW MIRROR ASSEMBLY
- Engage the clamp to install the outer rear view mirror assembly
- Install the outer rear view mirror assembly with the 3 nuts.
Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
- INSTALL OUTER MIRROR PROTECTOR
- Install a new outer mirror protector.
- Connect the connector and engage the clamp.
- INSTALL OUTER MIRROR CONTROL ECU ASSEMBLY (See REMOVAL )
- INSTALL DOOR FRAME GARNISH (See REASSEMBLY )
- INSTALL FRONT DOOR TRIM COVER (See REASSEMBLY )
- INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP (See REASSEMBLY )
- INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY (See REASSEMBLY )
- INSTALL COURTESY LIGHT ASSEMBLY (See REASSEMBLY )
- INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (See REASSEMBLY )
- INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG (See REASSEMBLY )
- INITIALIZE POWER WINDOW CONTROL SYSTEM
(See INITIALIZATION )