LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Mirror (Exterior)) >> Outer Mirror Control Ecu >> Removal

Outer Mirror Control Ecu: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG  (See DISASSEMBLY )
  2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL  (See DISASSEMBLY )
  3. REMOVE COURTESY LIGHT ASSEMBLY  (See DISASSEMBLY )
  4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY  (See DISASSEMBLY )
  5. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP  (See DISASSEMBLY )
  6. REMOVE OUTER MIRROR CONTROL ECU ASSEMBLY 
    1. Disconnect each connector.
    2. Remove the 2 screws and the outer mirror control ECU assembly
      Fig 1: Identifying Outer Mirror Control ECU Assembly And Screws
      G05756222Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals