Rear Seat Inner Belt Assembly: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL REAR SEAT INNER BELT ASSEMBLY
1. Install the rear seat inner belt assembly with the bolt
  Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf)
  
  NOTE: Do not allow the anchor part of the rear seat inner belt assembly to overlap the protruding parts of the floor panel.
  
  Fig 1: Identifying Rear Seat Inner Belt Assembly Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR SEAT CUSHION ASSEMBLY (See INSTALLATION )