LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Seat Belt) >> Child Restraint Seat Anchor Bracket >> Installation

Child Restraint Seat Anchor Bracket: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY 
    1. Install the child restraint seat anchor bracket sub-assembly with the 2 bolts.

      Torque: 31 N*m (316 kgf*cm, 23 ft.*lbf) 

      Fig 1: Identifying Child Restraint Seat Anchor Bracket Sub-Assembly Bolts
      G05320245Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL REAR SEATBACK ASSEMBLY  (See INSTALLATION )
  3. INSTALL REAR SEAT CUSHION ASSEMBLY  (See INSTALLATION )
  4. INSTALL REAR SEAT HEADREST ASSEMBLY LH 
  5. INSTALL REAR SEAT HEADREST ASSEMBLY RH 
scientia non olet · About LEMON Manuals