LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Wiper & Washer) >> Washer Level Warning Switch >> Removal

Washer Level Warning Switch: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  2. REMOVE RADIATOR GRILLE PROTECTOR  (See REMOVAL )
  3. REMOVE FRONT BUMPER ASSEMBLY  (See REMOVAL )
  4. REMOVE WASHER LEVEL WARNING SWITCH ASSEMBLY 
    1. Disconnect the connector.
    2. Remove the washer level warning switch assembly.
    Fig 1: Locating Level Warning Switch Assembly Connector
    G05756345Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002