LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Interior Panels) >> Instrument Panel Safety Pad >> Reassembly

Instrument Panel Safety Pad: Reassembly

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL NO. 1 INSTRUMENT PANEL PIN 
    1. Install the 4 No 1 instrument panel pins with the 4 screws < E >
      Fig 1: Installing No. 1 Instrument Panel Pin
      G05755554Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL INSTRUMENT PANEL SPACER 
    1. Install the instrument panel spacer.
      Fig 2: Installing Instrument Panel Spacer
      G05755553Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL ENGINE SWITCH 
    1. Engage the 2 claws and install the engine switch.
      Fig 3: Installing Engine Switch
      G05755557Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL AUTOMATIC LIGHT CONTROL SENSOR 
    1. Engage the 2 claws and install the automatic light control sensor
      Fig 4: Installing Automatic Light Control Sensor
      G05755558Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL DEFROSTER NOZZLE GARNISH 
    1. Engage the 8 claws and 2 clips, and install the defroster nozzle garnish.
    Fig 5: Installing Defroster Nozzle Garnish
    G05755550Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY  (See INSTALLATION )
  7. INSTALL NO. 2 INSTRUMENT PANEL WIRE 
    1. Engage the 5 clamps.
    2. Connect the connector and install the No. 2 instrument panel wire
    Fig 6: Installing No. 2 Instrument Panel Wire
    G05755549Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. INSTALL NAVIGATION ANTENNA ASSEMBLY  (See INSTALLATION )
  9. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY  (See INSTALLATION )
  10. INSTALL SIDE DEFROSTER NOZZLE 
    1. Engage the 4 claws and install the side defroster nozzle
      Fig 7: Installing Side Defroster Nozzle
      G05755548Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. INSTALL NO. 2 HEATER TO REGISTER DUCT 
    1. Install the No. 2 heater to register duct with the 4 screws < E >.
      Fig 8: Installing No. 2 Heater To Register Duct
      G05755547Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  12. INSTALL DEFROSTER NOZZLE ASSEMBLY 
    1. Install the defroster nozzle assembly with the 3 screws < E >
      Fig 9: Installing Defroster Nozzle Assembly
      G05755546Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT 
    1. Install the side No. 2 defroster nozzle duct with the screw < E >.
      Fig 10: Installing Side No. 2 Defroster Nozzle Duct
      G05755564Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  14. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT 
    1. Install the side No. 1 defroster nozzle duct with the screw < E >
      Fig 11: Installing Side No. 1 Defroster Nozzle Duct
      G05755544Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  15. INSTALL NO. 3 HEATER TO REGISTER DUCT 
    1. Install the No. 3 heater to register duct with the 3 screws < E >.
      Fig 12: Installing No. 3 Heater To Register Duct
      G05755543Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  16. INSTALL NO. 1 HEATER TO REGISTER DUCT 
    1. Install the No 1 heater to register duct with the 3 screws < E >.
      Fig 13: Installing No. 1 Heater To Register Duct
      G05755542Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals