LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Park Assist / Monitoring) >> ULTRASONIC SENSOR (for Rear Side) >> Installation

ULTRASONIC SENSOR (for Rear Side): Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL NO. 1 ULTRASONIC SENSOR 
    1. Install the No 1 ultrasonic sensor to the rear bumper
    2. Install the sensor retainer as shown in the illustration
    3. Connect the sensor connector
      4. Fig 1: Installing No. 2 Sensor Retainer
      G05300010Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 2 ULTRASONIC SENSOR 
    1. Install the No 2 ultrasonic sensor to the rear bumper
    2. Install the sensor retainer as shown in the illustration.
    3. Connect the sensor connector
      4. Fig 2: Installing No. 1 Sensor Retainer
      G05753881Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL REAR BUMPER ASSEMBLY  (See INSTALLATION )
  4. INSTALL NO. 1 REAR BUMPER PLATE  (See INSTALLATION )
  5. INSTALL SIDE LUGGAGE COMPARTMENT TRIM COVER  (See INSTALLATION )
  6. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK  (See INSTALLATION )
  7. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER  (See INSTALLATION )
  8. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM HOOK  (See INSTALLATION )
  9. INSTALL ROPE HOOK  (See INSTALLATION )
  10. INSTALL NO. 2 ROOM LIGHT ASSEMBLY  (See INSTALLATION )
  11. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER  (See INSTALLATION )
  12. INSTALL ROPE HOOK ASSEMBLY  (See INSTALLATION )
  13. INSTALL DECK SIDE TRIM BOX RH 
  14. INSTALL DECK SIDE TRIM BOX LH 
  15. INSTALL LUGGAGE COMPARTMENT TRIM COVER 
scientia non olet · About LEMON Manuals