Rear Bumper: Installation
WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL REAR BUMPER ASSEMBLY
- w/ Intuitive Parking Assist System:
- Engage the clamp and install the grommet
- Engage the 4 claws and install the rear bumper assembly.
- Engage the 6 claws
HINT.
Use the same procedure for the RH side and LH side
- Install the 2 rear bumper seal brackets.
- Install the 6 screws and 2 clips
- w/ Intuitive Parking Assist System.
- Engage the No. 3 luggage room wire connector.
- w/ Intuitive Parking Assist System:
- INSTALL NO. 1 REAR BUMPER PLATE
- Engage the 2 claws and install the No. 1 rear bumper plate
HINT
Use the same procedure for the RH side and LH side
- Engage the 2 claws and install the No. 1 rear bumper plate
- INSTALL SIDE LUGGAGE COMPARTMENT TRIM COVER LH (w/ Intuitive Parking Assist System) (See INSTALLATION )
- INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (w/ Intuitive Parking Assist System) (See INSTALLATION )
- INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/ Intuitive Parking Assist System) (See INSTALLATION )
- INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM HOOK (w/ Intuitive Parking Assist System) (See INSTALLATION )
- INSTALL ROPE HOOK (w/ Intuitive Parking Assist System) (See INSTALLATION )
- INSTALL NO. 2 ROOM LIGHT ASSEMBLY (w/ Intuitive Parking Assist System) (See INSTALLATION )
- INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER (w/ Intuitive Parking Assist System) (See INSTALLATION )
- INSTALL ROPE HOOK ASSEMBLY (w/ Intuitive Parking Assist System) (See INSTALLATION )
- INSTALL DECK SIDE TRIM BOX RH (w/ Intuitive Parking Assist System)
- INSTALL DECK SIDE TRIM BOX LH (w/ Intuitive Parking Assist System)
- INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM COVER (w/ Intuitive Parking Assist System)