LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Park Assist / Monitoring) >> ULTRASONIC SENSOR (for Front Side) >> Removal

ULTRASONIC SENSOR (for Front Side): Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  2. REMOVE RADIATOR GRILLE PROTECTOR  (See REMOVAL )
  3. REMOVE FRONT BUMPER ASSEMBLY  (See REMOVAL )
  4. REMOVE NO. 1 ULTRASONIC SENSOR 
    1. Disconnect the sensor connector.
    2. Remove the sensor retainer as shown in the illustration.
    3. Remove the No. 1 ultrasonic sensor from the front bumper
      Fig 1: Removing Sensor Retainer
      G05753872Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals