LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Park Assist / Monitoring) >> Television Camera >> Removal

Television Camera: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP  (See REMOVAL )
  2. REMOVE LUGGAGE LOCK CONTROL CABLE PLATE  (See REMOVAL )
  3. REMOVE LUGGAGE COMPARTMENT DOOR INSIDE HANDLE  (See REMOVAL )
  4. REMOVE LUGGAGE COMPARTMENT DOOR COVER  (See REMOVAL )
  5. REMOVE LUGGAGE COMPARTMENT DOOR REINFORCEMENT  (See REMOVAL )
  6. REMOVE TELEVISION CAMERA ASSEMBLY 
    1. Disengage the camera connector clamp.
    2. Disconnect the television camera connector.
    3. Remove the 2 screws
      Fig 1: Locating Camera Connector Clamp Screws
      G05753883Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disengage the 2 claws to remove the television camera assembly as shown in the illustration.
      Fig 2: Removing Television Camera Assembly
      G05753884Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002