LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Park Assist / Monitoring) >> Clearance Warning Buzzer >> Installation

Clearance Warning Buzzer: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL CLEARANCE WARNING BUZZER 
    1. Engage the clamp and install the clearance warning buzzer
    2. Connect the connector
    Fig 1: Identifying Clearance Warning Buzzer Clamp
    G05753868Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)  (See INSTALLATION )
  3. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)  (See INSTALLATION )
  4. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL  (See INSTALLATION )
  5. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY  (See INSTALLATION )
  6. INSTALL FRONT ASH RECEPTACLE ASSEMBLY  (See INSTALLATION )
  7. INSTALL CONSOLE PANEL SUB-ASSEMBLY  (See INSTALLATION )
  8. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH  (See INSTALLATION )
  9. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH  (See INSTALLATION )
  10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY  (See INSTALLATION )
  11. ADJUST CLOCK 
scientia non olet · About LEMON Manuals