LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Heating / Air Conditioning System) >> Smog Ventilation Sensor >> Removal

Smog Ventilation Sensor: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  2. REMOVE SMOG VENTILATION SENSOR 
    1. Disconnect the connector.
    2. Remove the bolt and smog ventilation sensor.
      Fig 1: Locating Bolt And Smog Ventilation Sensor
      G05755473Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals