LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Heating / Air Conditioning System) >> Ambient Temperature Sensor >> Removal

Ambient Temperature Sensor: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  2. REMOVE RADIATOR GRILLE PROTECTOR  (See REMOVAL )
  3. REMOVE FRONT BUMPER ASSEMBLY  (See REMOVAL )
  4. REMOVE AMBIENT TEMPERATURE SENSOR 
    1. Disconnect the connector and detach the clamp
    2. Remove the ambient temperature sensor
      Fig 1: Locating Ambient Temperature Sensor
      G05755446Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002