LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Theft Deterrent / Keyless Entry) >> Id Code Box >> Removal

Id Code Box: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY 
    1. Remove the instrument panel safety pad assembly (See REMOVAL )
  2. REMOVE LOWER DEFROSTER NOZZLE ASSEMBLY  (See REMOVAL )
  3. REMOVE ID CODE BOX (IMMOBILIZER CODE ECU) 
    1. Disconnect the connector.
    2. Remove the screw and the ID code box (immobilizer code ECU)
      Fig 1: Locating ID Code Box Screws
      G05754586Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals