LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Theft Deterrent / Keyless Entry) >> ELECTRICAL KEY OSCILLATOR (for Rear Floor) >> Removal

ELECTRICAL KEY OSCILLATOR (for Rear Floor): Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE REAR SEAT CUSHION ASSEMBLY  (See REMOVAL )
  2. REMOVE NO. 3 ROOM PARTITION PAD 
    1. Remove the clip and the No. 3 room partition pad
      Fig 1: Identifying No. 3 Room Partition Pad And Clip
      G05754560Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE ELECTRICAL KEY OSCILLATOR 
    1. Remove the 2 clips
      Fig 2: Identifying Electrical Key Oscillator Clip
      G05754561Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the connector
    3. Remove the 2 bolts and the electrical key oscillator.
      Fig 3: Locating Electrical Key Oscillator And Bolts
      G05754562Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002