ELECTRICAL KEY OSCILLATOR (for Rear Floor): Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL ELECTRICAL KEY OSCILLATOR
1. Install the electrical key oscillator with the 2 bolts
2. Connect the connector
  
  Fig 1: Locating Electrical Key Oscillator And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the 2 clips.
  
  Fig 2: Identifying Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 3 ROOM PARTITION PAD
1. Install the No. 3 room partition pad with the clip.
Fig 3: Identifying No. 3 Room Partition Pad With Clip
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR SEAT CUSHION ASSEMBLY (See INSTALLATION )