LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Theft Deterrent / Keyless Entry) >> ELECTRICAL KEY OSCILLATOR (for Front Floor) >> Installation

ELECTRICAL KEY OSCILLATOR (for Front Floor): Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ELECTRICAL KEY OSCILLATOR 
    1. Engage the clamp and install the electrical key oscillator
    2. Connect the connector
    Fig 1: Locating Electrical Key Oscillator And Clam
    G05754557Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 2 CONSOLE BOX DUCT  (See INSTALLATION )
  3. INSTALL CONSOLE BOX  (See INSTALLATION )
  4. INSTALL CONSOLE BOX REGISTER ASSEMBLY  (See INSTALLATION )
  5. INSTALL REAR ASH RECEPTACLE ASSEMBLY  (See INSTALLATION )
  6. INSTALL FRONT ASH RECEPTACLE ASSEMBLY  (See INSTALLATION )
  7. INSTALL CONSOLE PANEL SUB-ASSEMBLY  (See INSTALLATION )
  8. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH  (See INSTALLATION )
  9. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH  (See INSTALLATION )
  10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY  (See INSTALLATION )
scientia non olet · About LEMON Manuals