LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Lighting (Exterior)) >> Rear Light Assembly >> Installation

Rear Light Assembly: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL REAR LIGHT ASSEMBLY 
    1. Install the rear light assembly with the 3 nuts

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    2. Connect the connector
    Fig 1: Identifying Rear Light Assembly With Nuts
    G05756565Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL LUGGAGE COMPARTMENT DOOR COVER  (See INSTALLATION )
  3. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE  (See INSTALLATION )
  4. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE  (See INSTALLATION )
  5. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP  (See INSTALLATION )