LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Lighting (Exterior)) >> Fog Light Assembly >> Installation

Fog Light Assembly: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FOG LIGHT ASSEMBLY 
    1. Engage the 2 guides.
    2. Install the fog light assembly with the screw.
    Fig 1: Identifying Fog Light Assembly With Screw
    G05756526Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT BUMPER ASSEMBLY  (See INSTALLATION )
  3. INSTALL RADIATOR GRILLE PROTECTOR  (See INSTALLATION )
  4. INSTALL COOL AIR INTAKE DUCT SEAL  (See INSTALLATION )
  5. ADD WASHER FLUID (w/ Headlight Cleaner System)  (See INSTALLATION )
  6. VEHICLE PREPARATION FOR FOG LIGHT AIM  (See ADJUSTMENT  )
  7. PREPARATION FOR FOG LIGHT AIMING  (See ADJUSTMENT  )
  8. INSPECT FOG LIGHT ASSEMBLY  (See ADJUSTMENT  )
  9. ADJUST FOG LIGHT ASSEMBLY  (See ADJUSTMENT  )
scientia non olet · About LEMON Manuals