Front Axle Hub: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

HINT.

Use the same procedure for the RH side and LH side.
The procedure listed below is for the LH side

REMOVE FRONT WHEEL
DISCONNECT FRONT SPEED SENSOR WIRE (See REMOVAL )
SEPARATE FRONT DISC BRAKE CYLINDER ASSEMBLY (See REMOVAL )
REMOVE FRONT DISC (See REMOVAL )
REMOVE FRONT AXLE HUB SUB-ASSEMBLY
1. Remove the 4 bolts, front axle hub sub-assembly and front disc brake dust cover
  
  Fig 1: Locating Front Disc Brake Dust Cover Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002