LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Exterior) >> Rear Bumper >> Disassembly

Rear Bumper: Disassembly

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE NO. 3 LUGGAGE ROOM WIRE (w/ Intuitive Parking Assist System) 
    1. Disengage the 4 connectors.
    2. Disengage the 4 clamps and remove the No. 3 luggage room wire
      Fig 1: Locating No. 3 Luggage Room Wire Clamps And Connector
      G05756725Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE NO. 2 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)  (See REMOVAL )
  3. REMOVE NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)  (See REMOVAL )
  4. REMOVE REAR BUMPER PIECE LH 
    1. Disengage the 2 claws and remove the rear bumper piece LH
    Fig 2: Identifying Rear Bumper Piece LH Claws
    G05756726Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE REAR BUMPER PIECE RH 

    HINT

    Use the same procedure for the RH side and LH side

  6. REMOVE REFLEX REFLECTOR ASSEMBLY LH 
    1. Remove the screw.
    2. Disengage the claw and remove the reflex reflector assembly LH
    Fig 3: Identifying Reflex Reflector Assembly LH Claw
    G05756727Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE REFLEX REFLECTOR ASSEMBLY RH 

    HINT

    Use the same procedure for the RH side and LH side

  8. REMOVE NO. 2 REAR BUMPER SIDE RETAINER LH 
    1. Remove the bolt and screw, and No. 2 rear bumper side retainer LH.
    Fig 4: Identifying No. 2 Rear Bumper Side Retainer LH Bolts And Screws
    G05756728Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE NO. 2 REAR BUMPER SIDE RETAINER RH 

    HINT.

    Use the same procedure for the RH side and LH side

  10. REMOVE REAR BUMPER EXTENSION LH 
    1. Remove the 3 bolts and rear bumper extension LH.
    Fig 5: Identifying Rear Bumper Extension LH Bolts
    G05756729Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE REAR BUMPER EXTENSION RH 

    HINT:

    Use the same procedure for the RH side and LH side

  12. REMOVE REAR BUMPER PROTECTOR LH 
    1. Remove the rear bumper protector LH.
  13. REMOVE REAR BUMPER PROTECTOR RH 
    1. Remove the rear bumper protector RH
  14. REMOVE REAR BUMPER LOWER RETAINER LH 
    1. Remove the screw and rear bumper lower retainer LH.
    Fig 6: Identifying Rear Bumper Lower Retainer LH Screw
    G05756730Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  15. REMOVE REAR BUMPER LOWER RETAINER RH 

    HINT:

    Use the same procedure for the RH side and LH side.

  16. REMOVE REAR BUMPER PAD LH 
    1. Remove the rear bumper pad LH.
    Fig 7: Identifying Rear Bumper Pad LH
    G05756731Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  17. REMOVE REAR BUMPER PAD RH 

    HINT

    Use the same procedure for the RH side and LH side.

  18. REMOVE REAR BUMPER ENERGY ABSORBER 
    1. Remove the rear bumper energy absorber.
      Fig 8: Identifying Rear Bumper Energy Absorber
      G05756732Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  19. REMOVE REAR BUMPER ARM REINFORCEMENT LH 
    1. Disengage the 6 claws and 4 ribs and 3 guides, and remove the rear bumper arm reinforcement LH
    Fig 9: Identifying Rear Bumper Arm Reinforcement LH Claws Ribs And Guides
    G05756733Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  20. REMOVE REAR BUMPER ARM REINFORCEMENT RH 

    HINT

    Use the same procedure for the RH side and LH side

  21. REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY 
    1. Remove the 8 bolts and rear bumper reinforcement sub-assembly
      Fig 10: Identifying Rear Bumper Reinforcement Sub-Assembly Bolts
      G05756734Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  22. REMOVE NO. 1 REAR BUMPER SIDE SUPPORT LH 
    1. Remove the 2 screws, clip and No. 1 rear bumper side support LH
    Fig 11: Identifying No. 1 Rear Bumper Side Support Screws And Clips
    G05756735Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  23. REMOVE NO. 1 REAR BUMPER SIDE SUPPORT RH 

    HINT

    Use the same procedure for the RH side and LH side

  24. REMOVE NO. 2 REAR BUMPER SIDE SUPPORT LH 
    1. Remove the 2 screws and No. 2 rear bumper side support LH
    Fig 12: Identifying No. 2 Rear Bumper Side Support LH Screws
    G05756736Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  25. REMOVE NO. 2 REAR BUMPER SIDE SUPPORT RH 

    HINT

    Use the same procedure for the RH side and LH side

  26. REMOVE UPPER REAR BUMPER RETAINER LH 
    1. Remove the 2 screws and upper rear bumper retainer LH.
    Fig 13: Identifying Upper Rear Bumper Retainer LH Screws
    G05756737Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  27. REMOVE UPPER REAR BUMPER RETAINER RH 

    HINT:

    Use the same procedure for the RH side and LH side.

scientia non olet · About LEMON Manuals