LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> RX 400h FWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting >> Back-Up Light Assembly >> Removal

Back-Up Light Assembly: Removal

  1. REMOVE BACK DOOR TRIM PANEL ASSEMBLY UPPER  (See DISASSEMBLY )
  2. REMOVE BACK-UP LIGHT ASSEMBLY 
    1. Disconnect each connector.
    2. Remove the 3 nuts and disengage the clip, and remove the back-up light assembly.
    Fig 1: Identifying Back-Up Light Assembly With Nuts And Clip
    G05273973Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals