Oil Cooler Assembly: Removal

REMOVE ENGINE UNDER COVER NO.1 (See REMOVAL )
DRAIN HYBRID TRANSAXLE FLUID (See HYBRID TRANSAXLE FLUID )
REMOVE FRONT BUMPER ASSEMBLY
(See REMOVAL )
REMOVE OIL NO.1 COOLER ASSEMBLY
1. Disconnect the 2 oil cooler hoses.
2. Remove the 3 bolts, and oil cooler assembly.
  
  Fig 1: Locating Oil Cooler Hoses
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 3 bolts and air duct.
Fig 2: Locating Air Duct And Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002