LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> RX 400h AWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior >> Front Bumper >> Removal

Front Bumper: Removal

  1. REMOVE FRONT BUMPER STAY CENTER 
    1. Remove the 5 clips and front bumper stay center.
    Fig 1: Identifying Clips And Front Bumper Stay Center
    G05281656Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE FRONT BUMPER ASSEMBLY 
    1. Using a hexagon 4 mm wrench, remove the hexagon screw.
      Fig 2: Identifying Hexagon Screw
      G05281657Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Put protective tape under the front fender.
    3. Remove the 6 screws and 2 bolts.
    4. Release the 6 claws and front bumper assembly.
    5. w/headlight washer:
      1. Remove the washer hose clip.
    6. Disconnect the fog light connectors.
    Fig 3: Identifying Claws And Front Bumper Assembly
    G05281658Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals